Precision machining, start to finish
A full range of in-house processes to take your parts from concept to finished component.
CNC Milling
3-, 4- and 5-axis milling plus CNC gantry machining for complex geometries and multi-surface parts in one clamping.
CNC Turning
Horizontal and vertical NC lathes, turn-mill compounds and Swiss-type lathes for high-precision turned components.
Grinding
Surface grinding, manual and CNC ID/OD grinding, and gantry grinding for tight-tolerance finishing.
Wire-Cut & EDM
Fast, medium and slow wire-cut EDM plus sinker EDM for hardened materials and intricate profiles.
Surface & Heat Treatment
Nickel/zinc plating, blackening, anodizing and coating; nitriding, carbonitriding, quench and temper.
Secondary Services
Welding, polishing, assembly, casting, forging, stamping, sheet-metal fabrication, powder metallurgy and 3D printing.
Watch our machines at work
Real footage from our Dongguan workshops.
Equipment and process list
CNC Milling
- 3-axis
- 4-axis
- 5-axis
- Horizontal machining
- CNC gantry
Turning
- Horizontal NC lathes
- Vertical NC lathes
- Turn-mill compounds
- Swiss-type lathes
Grinding
- Surface grinding
- Manual ID/OD grinding
- CNC ID/OD grinding
- Gantry surface grinding
Wire-Cut & EDM
- Fast wire
- Medium wire
- Slow wire
- EDM sinking
Other Processes
- Welding
- Polishing
- Assembly
Materials we work with
Common grades in stock channels; special materials sourced on request.
| Category | Common grades | Key properties |
|---|---|---|
| Carbon & Mold Steel | 45#, SKD11, 12L14, 9CrWMn, 16MnCr5 | High strength and rigidity, heat-treatable |
| Stainless Steel | SUS303, SUS304, SUS316/316L, SUS420, SUS440C | Corrosion resistant, high strength, heat-treatable |
| Aluminum Alloys | AL5052, AL5083, AL6061, AL6082, AL7075 | Lightweight, easy to machine, cost-effective |
| Copper & Alloys | T2/C1100, HPb59-1/H62/H65, QAl9-4/C95400, QSn6.5-0.1/C51900, C17300 | Conductive, thermally efficient, fatigue resistant |
| Engineering Plastics | POM, PEEK, PA6/PA66, PC, PTFE | Lightweight, insulating, corrosion resistant, self-lubricating |
Finishing, heat treatment and more
One parts package, all processes coordinated by us.
Surface Treatment
- Nickel plating
- Zinc plating
- Blackening
- Anodizing
- Spray coating
Heat Treatment
- HRC hardening
- Nitriding
- Gas nitriding
- Carbonitriding
- Quench & temper
Other Services
- Casting & forging
- Stamping & injection molding
- Sheet-metal laser cutting & bending
- Powder metallurgy
- 3D printing
Four inspection gates on every order
Certified materials, in-process monitoring, CMM-verified dimensions and pre-shipment rechecks.
Incoming Inspection
Material grades verified against mill certificates to prevent mix-ups. Material certificates available on request.
In-Process Inspection
First-article confirmation and patrol checks monitor machining dimensions and prevent batch defects.
Final Inspection
Calipers, micrometers, height gauges and ZEISS CMM verify dimensional tolerances; burr and appearance checks.
Outgoing Inspection
Quantity, dimensions and packaging re-checked against your drawings before shipment.
Key equipment
Modern CNC machining centers and metrology from OKUMA and ZEISS.
OKUMA 5-Axis Machining Centers
2 units, max machining scope 800 × 1020 × 600 mm. One-clamping multi-surface forming and complex curved surfaces with strict GD&T control.
ZEISS CMM
High-precision 3D inspection for dimensions and geometric tolerances — flatness, parallelism, perpendicularity and position. Inspection reports available before shipment.
CNC Machining Workshops
Dedicated CNC turning and milling workshops covering turning, milling, grinding and wire-cut in-house.